Quested V3110 - Powered Studio Monitor
- 24/7 support
- in house training
- in house service centre
- 055 538 66 88
Specifications
Information
Quested V3110 - threeway monitor for studio use
Designed for use in near to midfield applications, the V3110 is our most powerful active monitor and, because of its 1000 watts of class AB and class D amplification, it is one of the most powerful in its class. The three way design of the V3110 and the utilisation of the soft dome mid and high frequency drivers along with the custom 10″ low frequency driver mean that the V3110 truly can deliver for the most demanding of material with a flat response down to 30Hz. The V3110 is not only improved on the low end performance, but also maintained the precision, compared to the (most recognised) Quested VS3208. It has a very linear response and a natural sound. The Quested V3110 is considered the flagship of the Quested powered monitors.
- Driver: Low Frequency 1 x 250mm(10″)
- Mid: 1 x 75mm (3”) soft dome
- High Frequency: soft dome 1 x 28mm (1 1/8″)
- Frequency Response: 34Hz – 20kHz ±2dB / 30Hz – 22kHz -6 dB
- Maximum SPL: 115.5 dB continuous pink noise @ 1m Leq 1 minute. 121.5 dB continuous pink noise per pair @ 1m Leq 1 minute
- Minimum sensitivity +4dBu for 100dB SPL @ 1m
- Maximum sensitivity -14dBu for 100 dB SPL @ 1m
- Subsonic: -3dB @ 14Hz, 24dB/oct
- Crossover Points: 650Hz, 2k5H, 24dB/oct.
- User LF EQ: 4 position rear mounted selector to select FLAT for normal use. -9dB and -3dB for cut below 100Hz, +1dB for lift above 80Hz.
- User MF EQ 3 position rear mounted switch to select FLAT for normal use, CUT/LIFT +/-1dB for 650Hz to 2k5Hz.
- User HF EQ 3 position rear mounted switch to select FLAT for normal use, CUT/LIFT +/-1dB for 2k5Hz to 40kHz.
- Voltage: Set by internal plugs: nominal 115V or 230V @ 50-60Hz AC. 230V setting: Min 160V (restricted output power): Max 263V. 115V setting: Min 80V (restricted output power): Max 132V
- Quiescent 72W, typical use 110W.
Related products
Compact monitor from Quested's V-Series. Self-powered, 2-way 4'' and 1,10''.
Thanks to the 2 channel class A / B amplifier with a nomination of 1550 W per channel at 4Ω and 775 W per channel at 8Ω, this product is specially developed and suitable for use in recording studios and film productions. This amplifier has a greatability
Quested has released a class A / B amplifier with the AP950-2, that is 950 Watt over two channels. By delivering this high power, the amplifier is able to deliver a lot of power to two passive Quested monitor speakers in a studio setup. The AP950-2 can be
